WE ARE YOUR 1-STOP INTERNET SOURCE FOR MOTORIZED DAMPERS, REPLACEMENT DAMPER MOTORS, RETROFIT ZONING SYSTEMS AND MORE!
DON’T SEE IT ON OUR WEBSITE? CALL US, WE HAVE A SOLUTION!
“Retrozone” and “Flexdamper” are trademarks of Retrozone inc.
LMB Kit 3
Belimo Trol A Temp MSTN EWC MAN to Honeywell
Damper Motor Upgrade Kit
(Free Shipping in Continental the US)
Click on pictures in gallery to view entire images.
LMB24 Kit 3:
- LMB24-3-T motor with 2 custom brackets and 3M engineering tape pre-mounted.
- 3 small self tapping screws
- alcohol pad
The newest RetroZone Damper Motor upgrade to keep your old dampers working!
This kit is a Belimo powered kit to replace both the Honeywell Trol-A-Temp MSTN and EWC MAN motors pictured with a Belimo LMB24. Please note the old Trol A temp and EWC motors are shown for illustration only
This kit uses the Industry Standard Belimo LMB electronic commercial motor to replace old and broken Honeywell MSTN and EWC MAN 8 terminal motors. This Belimo motor carries a 5 year factory warranty, and its brushless design means it will far outlast the factory OEM motor-at less cost!
This kit mounts in minutes with included Hardware, and offers a clutch for manual operation.
Belimo LMB24 Motor features infinite set point adjustments to allow minimum bypass air, a valuable feature not possible with the old motor.
The Belimo LMB24 features a Brushless Electronic design with 5 year factory warranty insure many years of trouble free service.
All motor upgrade kits come with engineering grade tape or self tapping screws(or both) and full instructions, mounts in minutes.
The Belimo motor may be reused on our fine damper bodies in case of old damper malfunctions.
Operates on same 24vac damper wiring as the Honeywell MSTN and EWC MAN 8 terminal motors. All electrical hook up instructions included.
Belimo LMB24 Motors will wire to any brand zone control panel already used to control these motors, and can be wired directly to a thermostat with no relay needed.
Belimo LMB24 Motor wire directly into system or zone panels using old Trol A Temp or EWC motors.
Belimo LMB24 Motor are never obsolete, if the original Trol A Temp or EWC damper breaks down in the future, the LMB motor can be removed and remounted on our fine SD3085 Damper body, sold separately.
Installs in minutes with included engineering tape or self tapping screws.
24volt AC operation.
95 Second run time
3 terminal operation
1.5 VA intermittent operation