WE ARE YOUR 1-STOP INTERNET SOURCE FOR MOTORIZED DAMPERS, REPLACEMENT DAMPER MOTORS, RETROFIT ZONING SYSTEMS AND MORE!
DON’T SEE IT ON OUR WEBSITE? CALL US, WE HAVE A SOLUTION!
“Retrozone” and “Flexdamper” are trademarks of Retrozone inc.
SDC-57
Starting at $259
For Pricing & Ordering-
Call or Email Us!
SCD- 57 series Commercial Rectangular Mechanical Dampers, Heavy duty galvanized, Aluminum, or Stainless Steel Construction. Call factory for pricing and information, as many options are available, including:
Single Blade construction
Opposed Blade construction
Parallel “Shutter” blade construction
Available with no Motor
Available with any Belimo Motor
Low Leak Options
Rugged commercial series galvanized, aluminum. or stainless steel dampers at great prices!
These dampers feature a standard 5" wide galvanized frame and blade system with quality bronze commercial linkages, and many options.
The SCD-57 Series commercial dampers feature extra rigid damper housings.
See options below.
• Polyurethane Foam Blade Seal
• Flexible Stainless Steel Jamb Seal
• Nylon Bushings.
• Stainless Steel Bushings
• All Stainless Steel Hardware
• Tack Welded Hardware..
• Vertical Blade Construction
• 1 .%" Flange (Around Frame)
• Six (6) Inch Blade Width
• Right Angle Mixing Damper with Internal linkage
• Right Angle Mixing Damper with External Linkage .
• Face & Bypass with Vertical Internal Linkage
• Face & Bypass with Vertical External Linkage .
• Face & Bypass with Horizontal Internal Linkage
• Galvanized Sleeve
• Jackshafting
• .080 Aluminum Construction
• (maximum 24" wide with jamb seals - 48" wide without jam
• seals aII multi-section units must have Jackshafts)
• 304 2b Stainless Steel Construction
The construction of this ultra heavy duty damper prevents jamming or binding, even if installed in warped duct. Heavy duty low leakage seal kits are are available on the SCD-57 series, including stainless steel side wiper seals for ultra low leakage.
Application: Use on a system up to 4" static pressure.
Motors: Buy without motors, or with full line Belimo Motors
Application: Use on a system up to 4" static pressure.
Odd sizes can be made, and usually take 3 - 4 weeks to ship.