RetroZone's patented energy saving Flexdamper™ system makes retro-fit zoning and other types of HVAC air control practical and affordable.The energy saving Flexdampers™ are designed to insert into the existing ductwork with little or no modification and will operate with almost any brand of zone control panel.
IN RETROFIT APPLICATIONSuse Flexdampers™ whenever the job requires more than one damper per zone. The Flexdamper's™ lower unit cost makes zoning practical in retrofit, multi duct systems that may need several dampers per zone cutting material and labor costs by thousands.
IN NEW CONSTRUCTIONuse Flexdampers™ where in-truss or other hard to access ducts will not allow the use of mechanical dampers. Flexdampers™ are designed to work in steel or flexible duct and can be easily serviced from a register or plenum.
MATERIALS used by the military in F-16 fighter aircraft, medical apparatus, and HVAC ducts around the world make Flexdampers™ resistant to heat, moisture, aging, airborne chemicals, and ozone, delivering many years of reliable service. Unlike a balloon, when inflated the Flexdamper™ skin is not stretched and fatigued. The skin simply repositions itself at ultra low air pressure to block airflow through the duct. In the unlikely event the outer Flexdamper™ skin is punctured, the constant supply of air the SPP Solenoid Pump Panel makes the leak virtually unnoticeable to system operation.
This is the Original Flexdamper™ AirZone System developed by Enerzone Systems Corp.
What you will need for a Flexdamper™ System for your Home or Office:
1. The correct size round or rectangular Flexdampers™
2. An SPP Solenoid panel and pump with the correct number of zones for your application.
3. Enough tubing and connectors to join the tubing together
4. A Roll of FRD-10 special connection tape
5. A zone control panel and 24vac transformer.
Questions?
No problem, email or call us and we will help you design a system, and then email you an estimate showing all the parts.
