WE ARE YOUR 1-STOP INTERNET SOURCE FOR MOTORIZED DAMPERS, MOTORIZED REPLACEMENT MOTORS, RETROFIT ZONING SYSTEMS AND MORE!
DON’T SEE IT ON OUR WEBSITE? CALL US, WE HAVE A SOLUTION!
Free Standard Shipping on Orders $25+ Continental USA only
Shipping to Alaska, Hawaii, and International shipping to Canada extra. Please place the order and factory will advise of additional shipping amounts prior to shipping.
Credit Cards will not be charged until shipping amounts are verified.
Expedited shipping available. Please call for pricing.
Belimo Damper motor Kit for Synchron-Enerstat, Lennox, Jackson, Retrozone, Young
(Free Shipping in Continental the US)
Tired of replacing spring return damper motors that get hot and burn out?
The Belimo LMB24 is one of the finest damper motors on the market today, with a five year factory warranty and outstanding reputation. This kit gets the premier commercial grade Belimo LMB24 damper motor and adapter kit for about the same price as the the stock 2-wire spring replacement motor. This kit will also work on almost any damper where the original motor had the output shaft of the Synchron motor shown in the last picture (motor with 2 yellow wires)
This kit works on most dampers that had a Hansen Synchron or Cramer 2- wire "spring return” motor that has the output shaft shown in the last picture.
MAKE SURE the output shaft of your motor looks like the one in the last picture, the motor with the two yellow wires. Check the 5 digit number on the side on your synchron motor, that ends in an "R" or an "L". This kit will retrofit any motor, with the much finer Belimo LMB24, that has the Cross pin end on the motor shaft.
These Synchron numbers will cross over to this kit:
38398L 37789R 38766R 38929L 39154R
The Belimo LMB24 Kit4 includes the Belimo LMB24-3-T motor, shaft adapter, capture bracket, anti rotation bracket and two self tapping sheet metal screws shown in the first picture; anything else in the other picture is for illustration purposes only.
This is what you get with this retrofit motor kit; any items shown in other pictures are for illustration purposes only.
Belimo LMB motor shown mounted to old damper, old Synchron motor in foreground. Works on round dampers as well.
The slotted input of the damper after old motor is removed.
Illustrated instructions, also available on how to hook up this 3 wire motor to a zone control panel with only two damper outputs terminals.
Brackets from kit mounted on damper, before motor is installed (damper is laying on its side)
Another picture of Belimo LMB motor mounted on the old damper.
Old take off Synchron brand motors, remove your old motor and make sure your old motor has the identical output shaft with cross pin (Synchron motors were made with many different outputs).