Free Standard Shipping on Orders $25+ Continental USA only

  Free Standard Shipping: Enjoy free standard shipping on orders of $25 or more within the continental United States.

Alaska, Hawaii, & Canada: Shipping to Alaska, Hawaii, and international shipping to Canada will incur additional freight charges.

Oversized Item Notice (CA & WA): Due to carrier surcharges, shipping 16” and 18” round dampers to California (CA) and Washington (WA) will incur an additional $10.00 shipping fee.

Please Note: For orders requiring additional shipping charges, please go ahead and place your order online.

Belimo CHB24-3-T

Compact Linear Non Fail-Safe Actuator

Specifications

Voltage AC/DC

AC/DC24V

Power Consumption (Running)

0.5 W

Power Consumption (Holding)

0.2 W

Power Consumption For Wire Sizing

1 VA

Force

125N [30lbf]

Control Type

    •    On/Off

    •    Floating/3-point

Manual Override

Disengage with magnet

Stroke

4"[100mm]

Running Time (Motor)

380s / 100 mm

Degree Of Protection NEMA

NEMA1

Enclosure Type

ULEnclosureType1

Ambient Temperature

-22...122°F [-30...50°C]


Application:

For on/off and floating point control of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturer’s specifications.


Operation:

The actuator is not provided with and does not require any limit switches, but is electronically protected against overload. The anti-rotation strap supplied with the actuator will prevent lateral movement. The actuator provides 4" [100 mm] of linear stroke. The stroke of the gear rack can be adjusted on both sides in increments of 0.8 in [20 mm] by means of the mechanical end stops. When reaching the damper or actuator end position, the actuator automatically stops. The gears can be manually disengaged with a button on the actuator cover. The actuators use a sensorless brushless DC motor, which is controlled by an

Application Specific Integrated Circuit (ASIC). The ASIC monitors and controls the actuator’s rotation and provides a digital rotation sensing (DRS) function to prevent damage to the actuator in a stall condition. Power consumption is reduced in holding mode.


Typical Specification:

Floating point, on/off control damper actuators shall be electronic type, with integrated linear stroking arm. Actuators shall have brushless DC motor technology and be protected from overload at all positions of linear stroke. Actuators shall have reversing switch and manual override on the cover. Run time shall be constant and independent of torque. Actuators shall be cUL listed, have a 5-year warranty, and be manufactured under ISO 9001 International

Quality Control Standards. Actuators shall be as manufactured by Belimo.


Technical Resources: CHB24-3-T Data Sheet

This website makes use of cookies. Please see our privacy policy for details.

ACCEPT

Deny