Copyright RetroZone inc.2015


RZ3-1 Replacement damper motor for HONEYWELL ARD ZD M847D

2 wire spring motor

$64.99 Plus

Free Shipping




Due to the high failure rate of Honeywell, Trol A Temp MARD, Jackson, Zone First, and  other motors with or without plastic gears.  We are offering the drop-in replacement RZ3-1M motor with a much more robust all-metal gear train.  This motor is a widely used OEM quality replacement motor with an outstanding reliability reputation.

Replaces many two wire Spring return motors with a "common footprint" design as shown in the pictures, with 1.33 or 1 and 5/16 inch center shaft to shaft spacing.

This ad is for one Non-OEM
  brand replacement motor that is  designed as a direct replacement normally open damper motor.

* Works as a replacement for Honeywell M847D series motors on popular ZD and ARD dampers, including M847D1004 and M847D1012 motors and other M847D series.
   This also replaces the Hansen 135-6 motor, as well as other brands with the same footprint.

Theses 24vac motors by Retrozone are drop-in replacements for most Honeywell 2 wire normally open, power to close spring return motors, as well as many other brands.

 Check our Gears in the picture!  Our all metal gears and precision engineering get rid of the of the failure prone  plastic OEM gears from Honeywell and others.   See for yourself in our comparison motor photos. We have also included photos of the motors that ours replaces.  These motors are made for dampers that are normally open, as used with Honeywell and Trol a Temp zone control systems.

Picture 1
   shows the heavy duty replacement motor you will receive.
Picture 2 shows our
  heavy duty metal gear train to end gear failure.
  7 shows the spacing that our motor will replace, up to a 5/16 shaft.
  8 show some of the motors the Retrozone RZ3-1M will replace.
Picture 9 shows two of the Honeywell motors the RZ3-M1 will replace.
These motors offer:
Less Cost
Better Quality
Full 1 Year Warranty


Features and Benefits

*Torque is consistently delivered throughout the full 90 degree rotational operating range to open and close the damper, and irrespective of whether the actuator is operating in Power Advance Mode (energized) or Spring Return Mode (de-energized).
*The energized actuator may be stalled at any angular position and remain energized indefinitely.
*When de-energized, the actuator consistently returns the damper shaft to home position, whether or not the starting spring return position is a full 90 degrees or any intermediate position.
*Extremely reliable.
  Statistical life reliability exceeds 120,000 cycles at 90% reliability and 100% confidence with no decay in delivery torque over life of the actuator.
*Very quiet operation typically 40dB, or less at 3 feet.


Photo 1








SecurityMetrics for PCI Compliance, QSA, IDS, Penetration Testing, Forensics, and Vulnerability Assessment